Controlled Sawtooth Wave Generator
Description
Controlled Sawtooth Wave Generator Signal Source
The Sawtooth output signal is controlled by two input signals that are updated at each discontinuity of the signal:
- Frequency [Hz]
- Phase Shift [0-360]
The controlled sawtooth signal is between 0 and 1.
Library
Control > Sources
Pins
| Name | Description |
|---|---|
| Frequency | Frequency Pin [Hz] |
| PhaseShift | PhaseShift Pin [0-360] |
| Out | PWM Output |
Parameters
| Name | Description |
|---|---|
| SamplingTime | -none or 0: No sampling. The system will be solved in the Newton loop (default). -auto: Inherit the sampling time of its source device. -Sampling Period: defined in seconds. |